Lexus ES manuals

Lexus ES: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
General

Symptom

Suspected Area

Link

System does not operate at all

Parking support alert system

CAN communication system

Clearance warning ECU assembly

Steering pad switch assembly

Blind spot monitor system*1

Panoramic view monitor system*2

Sonar Function

Symptom

Suspected Area

Link

Detection function operates when the operating conditions are not met

Hybrid control system

Skid control ECU

Clearance warning ECU assembly

Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning)

CAN communication system

Skid control ECU

Clearance warning ECU assembly

Buzzer Function

Symptom

Suspected Area

Link

Parking support brake system is normal but buzzer operation is intermittent

Check that the temporary mute function is not operating

-

Proceed to "No. 1 Clearance Warning Buzzer Circuit"

Proceed to "No. 2 Clearance Warning Buzzer Circuit"

Clearance warning ECU assembly

Combination meter assembly

Display Function

Symptom

Suspected Area

Link

While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display.

CAN communication system

Clearance warning ECU assembly

Combination meter assembly

While the parking support brake system is operating, no parking support brake notifications are displayed on the headup display.*3

CAN communication system

Clearance warning ECU assembly

Meter mirror sub-assembly

"Parking Support Brake Malfunction Visit Your Dealer" is displayed

Combination meter assembly

Clearance warning ECU assembly

"Parking Support Brake Unavailable" is displayed

Check that no foreign matter is attached to the ultrasonic sensors.

-

Steering angle neutral point (Parking support brake system registration)

CAN communication system

Combination meter assembly

Clearance warning ECU assembly

Parking support brake system does not operate when there is a possibility of a collision (Warning message "Parking Support Brake Unavailable" not displayed)

Check the installation of the ultrasonic sensors (front)

Check the installation of the ultrasonic sensors (rear)

Adjust the installation of the ultrasonic sensors as necessary.

Ultrasonic sensors (front)

Ultrasonic sensors (rear)

Clearance warning ECU assembly

Parking support brake system control operates when there is no possibility of a collision

Check the installation of the ultrasonic sensors (front)

Check the installation of the ultrasonic sensors (rear)

Adjust the installation of the ultrasonic sensors as necessary.

Ultrasonic sensors (front)

Ultrasonic sensors (rear)

Clearance warning ECU assembly

Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate)

Combination meter assembly (LED): Perform Active Test (Indicat. PKSB OFF LCD)

Steering pad switch assembly

Clearance warning ECU assembly

PKSB OFF indicator blinks

If "Yes" is displayed for the Data List item "BSM Radar Communication Invalid History", the blind spot monitor system may be malfunctioning.

Check that no foreign matter is attached to the ultrasonic sensors.

-

Steering angle neutral point (Parking support brake system registration)

  • *1: w/ Blind spot monitor system
  • *2: w/ Panoramic View Monitor System
  • *3: w/ Headup Display System

READ NEXT:

 System Description

SYSTEM DESCRIPTION FUNCTION OF COMPONENTS (a) The parking support brake system consists of the following components: Component Function Clearance Warning ECU Assembly Sends the drive for

 System Diagram

SYSTEM DIAGRAM w/ Blind Spot Monitor System w/ Panoramic View Monitor System

 Terminals Of Ecu

TERMINALS OF ECU CLEARANCE WARNING ECU ASSEMBLY (a) Disconnect the N41 clearance warning ECU assembly connector. (b) Measure the voltage and resistance on the wire harness side connector according to

SEE MORE:

 A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 Circuit Current Above Threshold (P219519,P219524,P219618,P219623)

DESCRIPTION Refer to DTC P003012. Click here HINT: Although the DTC titles say O2 sensor, these DTCs relate to the air fuel ratio sensor (sensor 1). DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P219519 A/F (O2) Sensor Signal Biased/Stuck Lean Ban

 Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Safety Connect System DTC No. Detection Item Link B153711 Telephone Sub Antenna Circuit Short to Ground B153713 Telephone Sub Antenna Circuit Open B157011 Indicator (Red) Circuit Short to Ground B157013 Indicator (Red) Circu

© 2016-2024 Copyright www.lexguide.net