Lexus ES: Precaution
PRECAUTION
PRECAUTION FOR ACTIVE NOISE CONTROL SYSTEM
(a) If the active noise control microphone garnish hole is blocked, clean away the blockage and perform diagnosis.
(b) If heavy objects are loaded onto the rear package tray, remove them before performing diagnosis.
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE:
Before checking parts for malfunctions, check that the audio system operates normally.
Use the table below to help determine the cause of problem symptoms. If multi
System Description
SYSTEM DESCRIPTION ACTIVE NOISE CONTROL SYSTEM (a) The active noise control system is a system that detects muffled engine sounds produced in sync that fluctuates according to the engine speed, by usi
System Diagram
SYSTEM DIAGRAM
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY (a) Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly. Adhesive: Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent NOTICE:
Do not apply adhesive to the oil inlet port of the engine oil
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during EGR cooler assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Insta
© 2016-2026 Copyright www.lexguide.net
