Lexus ES manuals

Lexus ES: Portable Player cannot be Registered

CAUTION / NOTICE / HINT

HINT:

Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.

Click here

PROCEDURE

1.

CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE

(a) Check if the portable player is "Bluetooth" audio compatible.

Result

Proceed to

The portable player is "Bluetooth" audio compatible.

A

The portable player is not "Bluetooth" audio compatible.

B

B

USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER

A

2.

CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE

(a) Referring to Owner's Manual, correctly register the portable player.

(b) Check that the portable player has been registered as a connected device.

HINT:

The portable player cannot be registered under any of the following conditions:

  • The A2DP (Advanced Audio Distribution Profile) is not used when registering a cellular phone.
  • A different portable player registration remains in the radio receiver assembly.
  • A different radio receiver assembly registration remains in the portable player.
  • The portable player is off.

OK:

The portable player has been registered as a connected device.

OK

END

NG

3.

CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

(a) Check if the portable player can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.

OK:

The portable player can be registered.

NG

MALFUNCTION IN PORTABLE PLAYER

OK

4.

REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

(a) Remove additional devices which use radio waves.

(b) Place the portable player close to the radio receiver assembly.

(c) Check that the portable player can be registered as a connected device.

OK:

The portable player can be registered.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

READ NEXT:

 Precaution

PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: After the engine switch is turned off, the radio receiver assembly records various types of memory and settings.

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Prec

 Radio Broadcast cannot be Received or Poor Reception

CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Pre

SEE MORE:

 VC Output Circuit

DESCRIPTION The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B, +B2 (BATT) terminals to operate the microprocessor. The ECM also provides this power to the sensors through the VC output circuit. When the VC circuit has a short circuit, the microproce

 Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for bank 1 and bank 2. The following procedure is for bank 2. PROCEDURE 1. INSTALL SPARK PLUG TUBE HINT: When using a new cylinder head LH, the spark plug tubes must be replaced. (a) Apply adhesive to a new spark plug tube as

© 2016-2024 Copyright www.lexguide.net