Lexus ES: Lost Communication With Body Control Module "B" (U0142)
DESCRIPTION
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
U0142 | Lost Communication with Main Body ECU | No communication with main body ECU (multiplex network body ECU) | -
CAN communication system
-
Main body ECU (multiplex network body ECU)
|
PROCEDURE
1. | GO TO CAN COMMUNICATION SYSTEM |
HINT:
Refer to CAN Communication System.
Click here
NEXT | | END |
READ NEXT:
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
SEE MORE:
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during air fuel ratio sensor removal/installation are shown below. Necessary Procedures After Parts Removed/Ins
DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING TECHSTREAM (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the fol
© 2016-2024 Copyright www.lexguide.net