Lexus ES: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Navigation System| DTC No. | Detection Item | Link |
|---|---|---|
| B1323 | Lost Communication with Haptic Device | |
| B1324 | Lost Communication with Meter | |
| B1325 | Lost Communication with HUD | |
| B1326 | Lost Communication with Clock Device (Local-CAN) | |
| B1535 | NTSC Disconnected (from Park Assist/Monitoring ECU) | |
| B153A | GVIF Disconnected (from Extension Module to H/U) | |
| B1543 | Extension Module Disconnected 2 | |
| B1551 | HD Radio Tuner Malfunction | |
| B1556 | Extension Module Malfunction 2 | |
| B1559 | Touch Pad Sensor Malfunction | |
| B155A | Touch Pad Vibration Driver Malfunction | |
| B155B | Touch Pad Memory Module Malfunction | |
| B1574 | GVIF Disconnected (from Park Assist/Monitoring ECU to EMV/MM Integrated Device) | |
| B1575 | GVIF Disconnected (from EMV/MM Integrated Device to Multi Display) | |
| B1579 | Voice Recognition Microphone Disconnected | |
| B1585 | USB Device Malfunction | |
| B158F | AV Signal Stoppage (Low Battery Voltage) | |
| B15A0 | LAN Master Malfunction | |
| B15A3 | Stereo Component Amplifier Malfunction | |
| B15A6 | Display Malfunction | |
| B15AD | Navigation Processor Malfunction | |
| B15B0 | Display Screen Malfunction | |
| B15B3 | Radio Tuner Malfunction | |
| B15B4 | CD Changer Malfunction | |
| B15B5 | DVD Changer Malfunction | |
| B15B7 | Bluetooth Module Malfunction | |
| B15BA | XM Tuner Malfunction | |
| B15C0 | GPS Antenna Connection Malfunction(short) | |
| B15C1 | GPS Antenna Connection Malfunction(break) | |
| B15C2 | Speed Signal Malfunction | |
| B15C3 | Speaker Output Short | |
| B15D0 | MOST Communication Malfunction | |
| B15D3 | Stereo Component Amplifier Disconnected | |
| B15D6 | Display Disconnected | |
| B15D9 | Operation Panel Disconnected | |
| B15DB | Telematics Transceiver Disconnected | |
| B15F5 | Air Conditioner ECU Vehicle Information Reading/Writing Processor Malfunction | |
| B15F6 | Main Body ECU Vehicle Information Reading/Writing Process Malfunction | |
| B15F7 | Certification ECU Vehicle Information Reading/Writing Process Malfunction | |
| B15F8 | D-Seat ECU Vehicle Information Reading/Writing Process Malfunction | |
| B15F9 | UART Communication Malfunction(for A/C) | |
| B15FE | XM Tuner Antenna Disconnected | |
| B15FF | XM Tuner Antenna Short | |
| C1610 | Camera ECU Malfunction | |
| C1622 | Back Camera Disconnected | |
| U0073 | Sending Malfunction (Navigation to APGS) | |
| U0100 | Engine ECU Communication | |
| U0129 | VSC(ECB)ECU Communication | |
| U0140 | Lost Communication with Body Control Module | |
| U0155 | Meter ECU Communication | |
| U0164 | Air Conditioner ECU Communication | |
| U0198 | Lost Communication with Telematic Control Module | |
| U023B | Lost Communication with Image Processing Module "B" | |
| U0265 | Lost Communication with Image Processing Sensor A | |
| U0293 | HV ECU Communication | |
| U1110 | Clearance Sonar ECU Communication | |
.gif)
READ NEXT:
Disc cannot be Ejected
CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Pre
Disc cannot be Inserted or is Ejected Right After Insertion
CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Pre
Display does not Dim when Light Control Switch is Turned ON
DESCRIPTION When the navigation system is activated with the light control switch in the tail or head position, before AVC-LAN communication is established, the multi-display assembly dims the display
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT TIMING GEAR BOLT (a) Make sure that the No. 1 cylinder is at TDC/compression. HINT: Check that the cutout of the camshaft timing gear assembly is at the top and align the timing mark (cutout) of the crankshaft pulley with the timing mark on the timing chain
Operation Check
OPERATION CHECK CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION (a) Turn the power switch on (IG). (b) With L on the mirror select switch selected, check that the outer rear view mirror assembly LH surface moves up, down, left and right normally. (c) With R on the mirror select switch selected, chec
