Lexus ES: Diagnostic Trouble Code Chart
Lexus ES (XZ10) Service Manual / Power Source & Network / A25a-fks (battery / Charging) / Charging System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Charging System| DTC No. | Detection Item | Warning Indicate | Memory | Note | Link |
|---|---|---|---|---|---|
| P161A87 | Lost Communication with Alternator Missing Message | Charge warning is not displayed | DTC stored | SAE Code: P161A | |
.gif)
READ NEXT:
Fail-safe Chart
FAIL-SAFE CHART If the following DTC is stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily. DTC No. Fail-safe Operation Fail-safe Deactivation Condition P16
Freeze Frame Data
FREEZE FRAME DATA DESCRIPTION The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in deter
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine / Trouble Codes.
SEE MORE:
Generator Control Module Position Sensor REF Power Source Circuit Voltage Out of Range (P06B01C,...,P313487)
DESCRIPTION The motor generator control ECU (MG ECU), which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction. If any of the following DTCs are output, replace the inverter with converter assembly. DTC No. Detecti
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during camshaft timing gear bolt removal/installation are shown below. Necessary Procedures After Parts Removed
© 2016-2025 Copyright www.lexguide.net
