Lexus ES manuals

Lexus ES: Definition Of Terms

DEFINITION OF TERMS

Term

Definition

Monitor Description

Description of what the hybrid vehicle control ECU monitors and how to detects malfunctions (monitoring purpose and its details).

Related DTCs

A group of diagnostic trouble codes that are output by the hybrid vehicle control ECU based on the same malfunction detection logic.

Typical Enabling Conditions

Preconditions that allow the hybrid vehicle control ECU to detect malfunctions.

With all preconditions satisfied, the hybrid vehicle control ECU stores DTCs when the monitored value(s) exceeds malfunction threshold(s).

Sequence of Operation

Order of monitor priority, applied if multiple sensors and components are involved in a single malfunction detection process.

Each sensor and component are monitored in turn and subsequent items are not monitored until the previous detection operation completes.

Required Sensors/Components

Sensors and components used by the hybrid vehicle control ECU to detect each malfunction.

Frequency of Operation

Number of times the hybrid vehicle control ECU checks for each malfunction during each driving cycle.

"Once per driving cycle" means that the hybrid vehicle control ECU only checks for malfunctions once during a single driving cycle.

"Continuous" means that the hybrid vehicle control ECU checks for malfunctions whenever enabling conditions are met.

Duration

Minimum time for which the hybrid vehicle control ECU must detect continuous deviation in monitored value(s) in order to store a DTC. Timing begins when typical enabling conditions are met.

Malfunction Thresholds

Value beyond which the hybrid vehicle control ECU determines malfunctions exist and stores DTCs.

MIL Operation

Timing of MIL illumination after a malfunction is detected.

"Immediate" means that the hybrid vehicle control ECU illuminates the MIL as soon as a malfunction is detected.

"2 driving cycles" means that the hybrid vehicle control ECU illuminates the MIL if the same malfunction is detected again during the next driving cycle.

READ NEXT:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 ACCELERATOR PEDAL SENSOR ASSEMBLY *2 COMBINATION METER ASSEMBLY *3 AIR CONDITIONING AMPLIFIER ASSEMBLY *4 SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWI

 System Diagram

SYSTEM DIAGRAM

 How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: *: Use the Techstream Use the following procedure to troubleshoot the hybrid control system. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT

SEE MORE:

 Engine Coolant Temperature Sensor 1 Signal Stuck in Range (P01152A)

DESCRIPTION Refer to DTC P011511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P01152A Engine Coolant Temperature Sensor 1 Signal Stuck in Range Either of the following conditions is met (2 trip detection logic): When engine is st

 High Voltage Fuse Accumulated Load History (P0A9563)

DESCRIPTION The hybrid vehicle control ECU estimates the thermal load of the high voltage fuse. If the accumulated thermal load exceeds the threshold, the hybrid vehicle control ECU will store this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate

© 2016-2024 Copyright www.lexguide.net