Lexus ES: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.
(5) Select the setting by referring to the table below.
Tilt & Telesco| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Autoaway/Return Operation Setting | Turn the auto away/return function | Tilt ON | $0000:Tilt&Telescopic OFF,$0001:Telescopic ON,$0010:Tilt ON,$0011:Tilt&Telescopic ON | Multiplex tilt and telescopic ECU |
(b) Customizing with the multi-display
(1) Turn the engine switch on (IG).
(2) Select the setting by referring to the table below
(3) Select the following menus: Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
(4) Select the setting by referring to the table below.
Other Vehicle Settings| Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Steering column easy-exit | Turn the auto away/return function | Tilt Only | Tilt & Telescopic / Tilt Only / Telescopic Only / Off | Multiplex tilt and telescopic ECU |
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of
Terminals Of Ecu
TERMINALS OF ECU MULTIPLEX TILT AND TELESCOPIC ECU *a Component with harness connected (Multiplex Tilt and Telescopic ECU) - - (a) Measure the voltage and resistance according to the valu
Terminals Of Ecu
TERMINALS OF ECU MULTIPLEX TILT AND TELESCOPIC ECU *a Component with harness connected (Multiplex Tilt and Telescopic ECU) - - (a) Measure the voltage and resistance according to the valu
SEE MORE:
Switch Lights of Remote Touch Always Illuminate or cannot be Controlled Using Rheostat
DESCRIPTION Power is supplied to the remote touch (remote operation controller assembly) illumination when the light control switch is in the tail or head position. HINT:
When the remote touch (remote operation controller assembly) is in self check mode, the switch illumination on the remote touc
Operation Check
OPERATION CHECK CHECK WINDSHIELD DEICER SYSTEM (a) Turn the engine switch on (IG). (b) Check that the windshield deicer wire (windshield glass) becomes warm by operating the front wiper deicer switch. (c) Confirm that windshield deicer system operation stops after approximately 15 minutes. NOTICE: I
