Lexus ES: Components
COMPONENTS
ILLUSTRATION
| *1 | TELEPHONE AND GPS ANTENNA CORD | - | - |
READ NEXT:
Installation
INSTALLATION PROCEDURE 1. INSTALL TELEPHONE AND GPS ANTENNA CORD (a) Engage the 5 clamps to install the telephone and GPS antenna cord. (b) Connect the connector. 2. INSTALL ROOF HEADLINING ASSEMBLY C
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during tel
SEE MORE:
Yaw Rate Sensor Circuit Voltage Out of Range (C00631C)
DESCRIPTION The airbag ECU assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. The skid control ECU (brake actuator assembly) calibrates the sensitivity of the yaw rate sensor (airbag ECU assembly) based on signals from the steering angle sensor and speed sens
Initialization
INITIALIZATION INITIALIZE SLIDING ROOF SYSTEM NOTICE:
When the sliding roof glass sub-assembly or sliding roof drive cable sub-assembly is adjusted or removed/installed, or the sliding roof drive gear sub-assembly is replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be in
© 2016-2026 Copyright www.lexguide.net
