Lexus ES: Components
COMPONENTS
ILLUSTRATION
*1 | BACK-UP BATTERY | *2 | TRANSCEIVER COVER |
READ NEXT:
INSTALLATION PROCEDURE 1. INSTALL BACK-UP BATTERY (a) Connect the connector and install the back-up battery with the "TOP" mark facing upward as shown in the illustration. Install in this Direc
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during bac
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT OIL PRESSURE CONTROL VALVE ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 6.2 to 8.2 Ω If the result is not as specified,
CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
When replacing the radio receiver assembly, always re
© 2016-2024 Copyright www.lexguide.net
![](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAEALAAAAAABAAEAAAIBTAA7)