Lexus ES: Components
Lexus ES (XZ10) Service Manual / Audio & Visual & Telematics / Audio / Video / Microphone / Components
COMPONENTS
ILLUSTRATION
| *1 | TELEPHONE MICROPHONE ASSEMBLY | - | - |
READ NEXT:
Installation
INSTALLATION PROCEDURE 1. INSTALL TELEPHONE MICROPHONE ASSEMBLY (a) Connect the connector. Install in this Direction (b) Engage the 2 claws to install the telephone microphone assembly as sh
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during tel
SEE MORE:
Vehicle Speed Sensor "A" No Signal (P050031)
DESCRIPTION The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU. The skid control ECU converts these wheel speed signals into a pulse signal and outputs it to the ECM via the combination meter. The ECM determines the vehicle speed based on the frequency
Disassembly
DISASSEMBLY PROCEDURE 1. SEPARATE FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP (a) Secure the drive shaft in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Using pliers, separate the front No. 2 axle inboard joint boot clamp as shown in the illustration. 2. SEPA
© 2016-2026 Copyright www.lexguide.net
