Lexus ES manuals

Lexus ES: Brake Fluid (for Gasoline Model)

Lexus ES (XZ10) Service Manual / Brake / Brake System (other) / Brake Fluid (for Gasoline Model)

READ NEXT:

 Bleeding

BLEEDING CAUTION / NOTICE / HINT NOTICE: Move the shift lever to P and apply the parking brake before bleeding the brakes. Add brake fluid to keep the level between the MIN and MAX lines of the r

 Components

COMPONENTS ILLUSTRATION *1 BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY - - ILLUSTRATION *1 FRONT DISC BRAKE BLEEDER PLUG *2 FRONT DISC BRAKE BLEEDER PLUG CAP *3 RE

 On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT BRAKE FLUID LEVEL IN RESERVOIR (a) Check the fluid level. Brake Fluid: SAE J1703 or FMVSS No. 116 DOT3 SAE J1704 or FMVSS No. 116 DOT4 NOTICE: If using a

SEE MORE:

 Left Front Wheel Speed Sensor Circuit Intermittent (C05001F)

DESCRIPTION Refer to DTC C050012 Click here DTC No. Detection Item DTC Detection Condition Trouble Area C05001F Left Front Wheel Speed Sensor Circuit Intermittent The speed sensor signal is excessively noisy. The calculated change in wheel speed is more than 980 m/s2 for 5*1

 Open in IG Circuit (B242E)

DESCRIPTION The headlight ECU sub-assembly operates using the power source voltage input from the IG terminal and ECUB terminal. The IG terminal power source voltage is supplied by turning the IG1-NO. 1 relay to ON. The headlight ECU sub-assembly receives engine switch on (IG) signals from the main

© 2016-2026 Copyright www.lexguide.net