Lexus ES: Battery Cooling Filter
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Battery Cooling Filter
Components
COMPONENTS
ILLUSTRATION
| *1 | NO. 1 HV BATTERY INTAKE FILTER | *2 | BATTERY SERVICE HOLE COVER |
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 BATTERY SERVICE HOLE COVER *2 SERVICE PLUG GRIP ILLUSTRATION *1 CONNECTOR COVER ASSEMBLY *2 ENGINE ROOM MAIN WIRE Tightening torque for "Major
Installation
INSTALLATION PROCEDURE 1. INSTALL BATTERY ECU ASSEMBLY CAUTION: Be sure to wear insulated gloves and protective goggles. (a) Install the battery ECU assembly to the HV battery with the 3 nuts. Torque:
SEE MORE:
Cornering Light Circuit
DESCRIPTION The headlight ECU sub-assembly controls the cornering lights. WIRING DIAGRAM except Bulb Type Turn Signal Light (for TMMK Made) for Bulb Type Turn Signal Light (for TMMK Made) CAUTION / NOTICE / HINT NOTICE:
If the headlight ECU sub-assembly LH has been replaced, it is necessary to
Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Battery or Open (P012015)
DESCRIPTION Refer to DTC P012011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P012015 Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Battery or Open The output voltage of VTA1 is higher than 4.535 V for 2 seconds or
© 2016-2026 Copyright www.lexguide.net
