Lexus ES: Battery Ecu (for Lithium-ion Battery)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Battery Ecu (for Lithium-ion Battery)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 BATTERY SERVICE HOLE COVER *2 SERVICE PLUG GRIP ILLUSTRATION *1 CONNECTOR COVER ASSEMBLY *2 ENGINE ROOM MAIN WIRE Tightening torque for "Major
Installation
INSTALLATION PROCEDURE 1. INSTALL BATTERY ECU ASSEMBLY CAUTION: Be sure to wear insulated gloves and protective goggles. (a) Install the battery ECU assembly to the HV battery with the 3 nuts. Torque:
SEE MORE:
Suspension Control ECU Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Suspension Control ECU Communication Stop Mode Any of the following conditions are met:
Communication stop for "Suspension Control (Air Suspension)" is indicated on the "Communication Bus Check" screen of the Techstream.
Click here
Installation
INSTALLATION PROCEDURE 1. INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH (a) Temporarily install the rear upper control arm assembly LH to the rear suspension member sub-assembly with the bolt and nut. NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nu
© 2016-2025 Copyright www.lexguide.net
