Lexus ES: Automatic Transaxle Unit
READ NEXT:
COMPONENTS ILLUSTRATION *1 NO. 1 OIL COOLER OUTLET TUBE SUB-ASSEMBLY *2 NO. 1 TRANSMISSION OIL FILLER TUBE *3 OIL COOLER UNION SUB-ASSEMBLY *4 OVERFLOW PLUG *5 PARK/NEUTRAL P
DISASSEMBLY PROCEDURE 1. REMOVE TRANSMISSION CONTROL SHAFT LEVER (a) Remove the nut, washer and transmission control shaft lever from the manual valve lever shaft sub-assembly. 2. REMOV
INSPECTION PROCEDURE 1. INSPECT TRANSMISSION OIL CLEANER MAGNET (a) Use the removed transmission oil cleaner magnets to collect any steel chips. Examine the chips and particles in the transaxle hou
SEE MORE:
DESCRIPTION Refer to DTC P011011. Click here HINT: When DTC P011015 is stored, the ECM enters fail-safe mode. During fail-safe mode, the intake air temperature is estimated to be 20°C (68°F) by the ECM. Fail-safe mode continues until a pass condition is detected, and the power switch is then tur
DESCRIPTION If a malfunction in the speed sensor signal circuit or yaw rate and acceleration sensor (airbag ECU assembly) circuit occurs, the 4WD ECU assembly will output this DTC. The airbag ECU assembly has a built-in yaw rate and acceleration sensor. DTC No. Detection Item DTC Detection Co
© 2016-2026 Copyright www.lexguide.net
