Lexus ES: A25a-fxs Coolant (for Engine)
READ NEXT:
COMPONENTS
ILLUSTRATION
*1
RADIATOR CAP SUB-ASSEMBLY
*2
RADIATOR DRAIN COCK PLUG
*3
NO. 1 ENGINE UNDER COVER
-
REPLACEMENT
CAUTION / NOTICE / HINT
CAUTION:
Do not remove the radiator cap sub-assembly or radiator drain cock plug while
the engine and radiator assembly are still hot. Pressurized, hot engine
Components
COMPONENTS
ILLUSTRATION
*1
CENTER NO. 4 ENGINE UNDER COVER
-
-
ILLUSTRATION
*1
OIL FILTER SUB-ASSEMBLY
SEE MORE:
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. PRECAUTION NOTICE: After turning the engine switch (for Gasoline Model) or power switch (for HV Model) off, waiting time may be required bef
INSTALLATION PROCEDURE 1. INSTALL SUSPENSION TOWER DAMPER (a) Using a union nut wrench, install the suspension tower damper to the vehicle with the 2 nuts. Torque: Specified tightening torque : 35 N·m {357 kgf·cm, 26 ft·lbf} NOTICE: Do not extend or compress the damper. HINT:
Calculate th
© 2016-2024 Copyright www.lexguide.net