Lexus ES: Wheel Speed Sensor Malfunction (C164D)
DESCRIPTION
-
This DTC is stored when the parking assist ECU receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the electronically controlled brake system via CAN communication.
-
This DTC is stored when the rear television camera assembly receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the electronically controlled brake system via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
| C164D | Wheel Speed Sensor Malfunction | Wheel speed sensor malfunction | Electronically controlled brake system |
PROCEDURE
(a) Clear the DTCs.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs Chassis > Rear Camera > Clear DTCs
(b) Check for DTCs.
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes Chassis > Rear Camera > Trouble Codes
| Result | Proceed to |
| No DTCs are output | A |
| DTC C164D is output ("Panoramic View Monitor") | B |
| DTC C164D is output ("Parking Assist Camera") | C |
HINT:
If the parking assist ECU cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.
HINT:
-
The DTC is stored when a malfunction occurs in the electronically controlled brake system.
-
If troubleshooting and repair of the malfunction in the electronically controlled brake system have been completed, DTC C164D will not be output again when rechecking for DTCs.
-
If DTC C164D is stored frequently, duplicate the problem symptoms and perform troubleshooting again even if the DTC is not output when rechecking for DTCs.
Click here
| A | | USE SIMULATION METHOD TO CHECK |
| B | | GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM |
| C | | REPLACE REAR TELEVISION CAMERA ASSEMBLY |
READ NEXT:
DESCRIPTION
This DTC is stored if the parking assist ECU judges as a result of its self check that the vehicle information received via CAN communication and the vehicle information stored in the p
DESCRIPTION This DTC is stored if the rear television camera assembly judges that there is an internal malfunction as a result of its self check. HINT: The rear television camera assembly stores diffe
DESCRIPTION This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check. HINT: The parking assist ECU stores different types of information
SEE MORE:
DESCRIPTION If the electric parking brake is used continuously, system operation is stopped to prevent the parking brake actuator assembly from overheating. This DTC is stored when system operation is stopped to prevent the parking brake actuator assembly from overheating and is not a malfunction.
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK FUEL PUMP OPERATION AND INSPECT FOR FUEL LEAK (a) Check fuel pump operation. (1) Connect the Techstream to the DLC3. (2) Turn the engine switch on (IG). NOTICE: Do not start the engine. (3) Turn the Techstream on. (4) Enter the following menus: Powertrain / E
© 2016-2026 Copyright www.lexguide.net
