Lexus ES: System Diagram
Lexus ES (XZ10) Service Manual / Vehicle Interior / Exterior Panels / Trim / Grille Shutter System / System Diagram
SYSTEM DIAGRAM
READ NEXT:
System Description
SYSTEM DESCRIPTION GRILLE SHUTTER SYSTEM (a) General description The swing grille actuator assembly receives signals from the ECM, hybrid vehicle control ECU and air conditioning amplifier assembly vi
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use these procedures to troubleshoot the grille shutter system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Initialization
INITIALIZATION CHANGE GRILLE SHUTTER CONTROL MODE AND/OR PERFORM INITIALIZATION (a) In the following situations, it is necessary to change the grille shutter control mode and/or initialize the grille
SEE MORE:
Hybrid/EV Battery Negative Contactor Circuit Short to Auxiliary Battery or Open (P0ADD15)
DESCRIPTION Refer to the description for DTC P0AE411. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P0ADD15 Hybrid/EV Battery Negative Contactor Circuit Short to Auxiliary Battery or Open Open or short to +B in SMRG circuit: Primar
Terminals Of Ecu
TERMINALS OF ECU CHECK SWING GRILLE ACTUATOR ASSEMBLY (a) Disconnect the z23 swing grille actuator assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Tester Co
© 2016-2025 Copyright www.lexguide.net
