Lexus ES manuals

Lexus ES: System Diagram

SYSTEM DIAGRAM

READ NEXT:

 Terminals Of Ecu

TERMINALS OF ECU STEREO COMPONENT EQUALIZER ASSEMBLY Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition G15-1 (CANH) P CAN communication signal

 Lost Communication With ECM/PCM "A" Missing Message (U010087,U012987,U014087,U016487,U029387,U115187)

DESCRIPTION These DTCs are stored when a malfunction occurs in the CAN communication circuit. DTC No. Detection Item DTC Detection Condition Trouble Area U010087 Lost Communication With

 Amplifier Antenna

SEE MORE:

 Removal

REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH Click here 2. REMOVE COWL SIDE TRIM BOARD LH Click here 3. REMOVE FRONT DOOR OPENING TRIM COVER LH Click here 4. REMOVE INSTRUMENT SIDE PANEL LH Click here 5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 6. REM

 Terminals Of Ecu

TERMINALS OF ECU NOTICE: Turning the engine switch on (IG) with connectors disconnected may cause DTCs to be stored. Make sure to clear the DTCs after inspection has been performed. Do not apply excessive force to the millimeter wave radar sensor assembly connector. CHECK MILLIMETER WAVE RA

© 2016-2026 Copyright www.lexguide.net