Lexus ES: System Description
SYSTEM DESCRIPTION
LUGGAGE COMPARTMENT DOOR OPENER SYSTEM DESCRIPTION
(a) If the trunk and fuel switch assembly (luggage compartment door opening switch) is pressed and the luggage compartment door is closed, a luggage compartment door lock assembly open operation signal is sent to the main body ECU (multiplex network body ECU). Then the main body ECU (multiplex network body ECU) unlatches the luggage compartment door.
FUNCTION OF MAIN COMPONENTS
| Item | Outline |
|---|---|
| Luggage door opening cancel switch assembly | Cancels luggage compartment door opener system operation |
| Trunk and fuel switch assembly (Luggage compartment door opening switch) | Turns the luggage compartment door opener system ON/OFF |
| Luggage compartment door lock assembly | Opens the luggage compartment door via a signal from the main body ECU (multiplex network body ECU) |
| Main body ECU (Multiplex network body ECU) | Receives luggage door opening cancel switch assembly on signal and a luggage compartment door lock assembly open operation signal, and controls the luggage compartment door opener system |
READ NEXT:
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the luggage compartment door opener system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
Operation Check
OPERATION CHECK BASIC FUNCTION INSPECTION (a) When the trunk and fuel switch assembly (luggage compartment door opening switch) is pressed, check that the luggage compartment door unlatches. (b) While
Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to ma
SEE MORE:
No. 2 Clearance Warning Buzzer Circuit
DESCRIPTION This circuit consists of the No. 2 clearance warning buzzer and clearance warning ECU assembly. An ECU-excited type buzzer is used. The ECU operates the buzzers using a sound pattern that changes depending on the distance to the obstacle. WIRING DIAGRAM PROCEDURE 1. PERFORM ACTIVE
Inspection
INSPECTION PROCEDURE 1. INSPECT FUEL PRESSURE SENSOR (a) Check the fuel pressure sensor output voltage. (1) Apply 5 V between terminals 1 (VC) and 2 (E2). NOTICE:
Be careful when connecting the leads as the fuel pressure sensor may be damaged if the leads are connected to the wrong terminals
