Lexus ES: Precaution
PRECAUTION
PRECAUTION FOR ACTIVE NOISE CONTROL SYSTEM
(a) If the active noise control microphone garnish hole is blocked, clean away the blockage and perform diagnosis.
(b) If heavy objects are loaded onto the rear package tray, remove them before performing diagnosis.
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE:
Before checking parts for malfunctions, check that the audio system operates normally.
Use the table below to help determine the cause of problem symptoms. If multi
System Description
SYSTEM DESCRIPTION ACTIVE NOISE CONTROL SYSTEM (a) The active noise control system is a system that detects muffled engine sounds produced in sync that fluctuates according to the engine speed, by usi
System Diagram
SYSTEM DIAGRAM
SEE MORE:
Terminals Of Ecu
TERMINALS OF ECU CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) (a) Disconnect the P22 sliding roof ECU (sliding roof drive gear sub-assembly) connector. (b) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness
Steering Angle Sensor Module Calibration / Parameter Memory Failure (C052646)
DESCRIPTION When the vehicle is being driven in a straight line at 15 km/h (9 mph) for 1 second or more, the skid control ECU (brake actuator assembly) calculates the steering angle sensor zero point and updates the zero point if the difference between the calculated zero point and current zero poin
© 2016-2026 Copyright www.lexguide.net
