Lexus ES: Portable Player cannot be Connected Manually/Automatically
CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.
Click here .gif)
PROCEDURE
| 1. | CHECK CONNECTED DEVICE SETTINGS |
(a) Check if the portable player is registered as a connected device.
NOTICE:
If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.
HINT:
Only 5 portable players can be registered.
| Result | Proceed to |
|---|---|
| The portable player is registered as a connected device. | A |
| The portable player is not registered as a connected device. | B |
| B |  | REGISTER PORTABLE PLAYER AS CONNECTED DEVICE |
|
| 2. | CHECK SYMPTOMS |
(a) Check the connection condition between the portable player and radio receiver assembly.
HINT:
The portable player cannot be connected under any of the following conditions:
- The portable player is connected to another device.
- The portable player is connected to the radio receiver assembly using the hands-free function.
- The radio receiver assembly has cleared the portable player registration.
- The portable player is off.
| Result | Proceed to |
|---|---|
| The portable player cannot be connected automatically. | A |
| The portable player cannot be connected manually. | B |
| B | | GO TO STEP 4 |
|
| 3. | CHECK AUTOMATIC CONNECTION SETTINGS |
(a) Check the automatic connection settings of the "Bluetooth" audio.
(1) Check that the "Bluetooth" connection setting is on.
OK:
"Bluetooth" connection setting is on.
| NG | | TURN "Bluetooth" POWER TO ON |
|
| 4. | CHECK PORTABLE PLAYER STATUS |
(a) Check the status of the portable player.
(1) Check that the portable player is not in standby mode.
(2) Check that the portable player is not connected to another device (headphones, etc.).
OK:
The portable player is not in standby mode and not connected to another device (headphones, etc.).
| NG | | TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES, etc.) |
|
| 5. | CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be connected manually/automatically to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be connected manually/automatically.
| NG | | PORTABLE PLAYER IS NOT COMPATIBLE |
|
| 6. | REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Check if the portable player can be connected manually/automatically.
OK:
The portable player can be connected manually/automatically.
| OK | | END |
| NG | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
READ NEXT:
Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
PROCEDURE 1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL (a) Check if track information is displayed normally on another "Bluetooth" audio compatible vehicle of the
Portable Player cannot be Registered
CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable a
Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE:
After the power switch is turned off, the radio receiver assembly records various types of memory and
SEE MORE:
Initialization
INITIALIZATION INITIALIZE LUGGAGE CLOSER MOTOR ASSEMBLY NOTICE: Initialization of the luggage closer motor assembly (luggage compartment door initial position learning) is necessary if the following work procedures are performed while the luggage compartment door is open.
The cable to the negativ
Auto ID Under Registration (C2128)
DESCRIPTION When ID registration is being performed via the automatic ID registration function, the tire pressure warning ECU and receiver stores C2128 and the tire pressure warning light flashes for 1 minute and then illuminates. When the tire pressure warning ECU receives data from all registered
