Lexus ES: Portable Player cannot be Connected Manually/Automatically
CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.
Click here .gif)
PROCEDURE
| 1. | CHECK CONNECTED DEVICE SETTINGS |
(a) Check if the portable player is registered as a connected device.
NOTICE:
If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.
HINT:
Only 5 portable players can be registered.
| Result | Proceed to |
|---|---|
| The portable player is registered as a connected device. | A |
| The portable player is not registered as a connected device. | B |
| B | .gif) | REGISTER PORTABLE PLAYER AS CONNECTED DEVICE |
|
| 2. | CHECK SYMPTOMS |
(a) Check the connection condition between the portable player and radio receiver assembly.
HINT:
The portable player cannot be connected under any of the following conditions:
- The portable player is connected to another device.
- The portable player is connected to the radio receiver assembly using the hands-free function.
- The radio receiver assembly has cleared the portable player registration.
- The portable player is off.
| Result | Proceed to |
|---|---|
| The portable player cannot be connected automatically. | A |
| The portable player cannot be connected manually. | B |
| B | | GO TO STEP 4 |
|
| 3. | CHECK AUTOMATIC CONNECTION SETTINGS |
(a) Check the automatic connection settings of the "Bluetooth" audio.
(1) Check that the "Bluetooth" connection is on.
OK:
"Bluetooth" connection is on.
| OK | | GO TO STEP 4 |
| NG | | TURN "Bluetooth" POWER TO ON |
| 4. | CHECK PORTABLE PLAYER STATUS |
(a) Check the status of the portable player.
(1) Check that the portable player is not in standby mode.
(2) Check that the portable player is not connected to another device (headphones, etc.).
OK:
The portable player is not in standby mode and not connected to another device (headphones, etc.).
| NG | | TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES, etc.) |
|
| 5. | CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be connected manually/automatically to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be connected manually/automatically.
| NG | | PORTABLE PLAYER IS NOT COMPATIBLE |
|
| 6. | REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Check if the portable player can be connected manually/automatically.
OK:
The portable player can be connected manually/automatically.
| OK | | END |
| NG | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
READ NEXT:
Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
PROCEDURE 1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL (a) Check if track information is displayed normally on another "Bluetooth" audio compatible vehicle of the
Portable Player cannot be Registered
CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable a
Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE:
After the power switch is turned off, the radio receiver assembly records various types of memory and
SEE MORE:
Internal Control Module A/D Processing Performance Internal Electronic Failure (P060B49)
MONITOR DESCRIPTION This DTC is stored when a communication error occurs in the ECM. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P060B49 Internal Control Module A/D Processing Performance Internal Electronic Failure ECM main CPU communication er
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Wiper and Washer System DTC No. Detection Item DTC Output from Link B1245 Lost Communication with Wiper ECU LIN Main Body B1279 Lost Communication with Humidity/Rain Sensor LIN Main Body B1370 ECU Malfunction Windshield wiper m
