Lexus ES manuals

Lexus ES: Front Door Opening Trim Weatherstrip

Lexus ES (XZ10) Service Manual / Vehicle Exterior / Door / Hatch / Front Door Opening Trim Weatherstrip

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 FRONT DOOR OPENING TRIM WEATHERSTRIP - -

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fron

 Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL FRONT DOOR OPENING TRIM WEATHERS

SEE MORE:

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE OIL PUMP RELIEF VALVE (a) Using a 27 mm socket wrench, remove the oil pump relief valve plug from the oil pump cover sub-assembly. *1 Oil Pump Relief Valve *2 Oil Pump Relief Valve Spring *3 Oil Pump Relief Valve Plug (b) Remove

 On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT RAIN SENSOR (a) Disconnect the rain sensor connector. *a Front view of wire harness connector (to Rain Sensor) (b) Measure the voltage according to the value(s) in the table below. Standard Voltage: Tester Connection Conditi

© 2016-2024 Copyright www.lexguide.net