Lexus ES: Freeze Frame Data
FREEZE FRAME DATA
FREEZE FRAME DATA
NOTICE:
- It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specification.
- Turn the power switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the Techstream.
(a) Turn the power switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the power switch on (IG).
(d) Turn the Techstream on.
(e) Check the freeze frame data on the Techstream.
Chassis > EMPS| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Meter Vehicle Velocity | Vehicle speed from speedometer | Min.: 0.0 km/h (0.0 MPH) Max.: 300.0 km/h (186.4 MPH) |
| - |
| Wheel Speed Right | Rear right wheel speed | Min.: 0 km/h (0 MPH) Max.: 255 km/h (158 MPH) |
| - |
| Wheel Speed Left | Rear left wheel speed | Min.: 0 km/h (0 MPH) Max.: 255 km/h (158 MPH) |
| - |
| Motor Actual Current | Amount of current to motor | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left | Power switch on (READY) and steering wheel being turned |
| Command Value Current | Requested current to motor | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left | Power switch on (READY) and steering wheel being turned |
| Steering Angle Velocity | Steering angle speed | Min.: -32768 deg/s Max.: 32767 deg/s | Value changes in proportion to steering speed - The value increases when turning left and decreases when turning right | Power switch on (READY) and steering wheel being turned |
| Thermistor Temperature | ECU substrate temperature | Min.: -50.0°C (-58.0°F) Max.: 150.0°C (302.0°F) | -50°C to 150°C (-58°F to 302°F) | - |
| IG Power Supply | IG power source voltage | Min.: 0.0000 V Max.: 20.1531 V | 8 to 16 V | Power switch on (IG) |
| Steering Wheel Torque | Steering wheel torque | Min.: -7.00 Nm Max.: 7.00 Nm | Value changes in proportion to steering effort - The value increases when turning left and decreases when turning right | Power switch on (READY) and steering wheel being turned |
| Motor Rotation Angle | Motor rotation angle | Min.: 0.000 deg Max.: 360.000 deg | During steering operation, motor rotation angle value changes from 0 to 360° | Power switch on (READY) and steering wheel being turned |
| Command Val Current 2 | Requested current to motor | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor Voltage | Motor power supply voltage | Min.: 0.000 V Max.: 98.000 V | 9 to 16 V | Always |
| TRQ1 Zero Point Value | Zero point value of torque sensor 1 | Min.: 0.0000 V Max.: 4.9725 V | 2.3 to 2.7 V | Power switch on (READY) and steering wheel not being turned (without load) |
| TRQ2 Zero Point Value | Zero point value of torque sensor 2 | Min.: 0.0000 V Max.: 4.9725 V | 2.3 to 2.7 V | Power switch on (READY) and steering wheel not being turned (without load) |
| PS Assist Signal | Status of the record of power steering assist signal | OFF or ON | OFF: Power switch on (IG) ON: Power switch on (READY) | - |
| Ready Status | Ready status | OFF or Ready | OFF: Except power switch on (READY) Ready: Power switch on (READY) | - |
| Motor Actual Current 2 | Amount of current to motor | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Rotation Angle Sens Avg(SIN) | Rotation angle sensor average (SIN) | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Rotation Angle Sens Avg(COS) | Rotation angle sensor average (COS) | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Steering Angle | Steering angle | Min.: -3072.0 deg Max.: 3070.5 deg | - | - |
| Torque Sensor 1 Output | Torque sensor 1 output value | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Torque Sensor 2 Output | Torque sensor 2 output value | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Torque Sensor 1 Power Supply | Torque sensor 1 power supply voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Torque Sensor 2 Power Supply | Torque sensor 2 power supply voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Rotation Angle Sensor Output 1 | Rotation angle sensor Vx1 output voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Rotation Angle Sensor Output 2 | Rotation angle sensor Vx2 output voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Rotation Angle Sensor Output 3 | Rotation angle sensor Vy1 output voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Rotation Angle Sensor Output 4 | Rotation angle sensor Vy2 output voltage | Min.: 0.0000 V Max.: 4.9725 V | - | - |
| Motor 1 Terminal Current (U) | Motor 1 terminal current (U phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 1 Terminal Current (V) | Motor 1 terminal current (V phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 1 Terminal Current (W) | Motor 1 terminal current (W phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Current (U) | Motor 2 terminal current (U phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Current (V) | Motor 2 terminal current (V phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Current (W) | Motor 2 terminal current (W phase) | Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort | Power switch on (READY) and steering wheel being turned |
| Motor 1 U Phase Duty | Motor 1 U phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 1 V Phase Duty | Motor 1 V phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 1 W Phase Duty | Motor 1 W phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 2 U Phase Duty | Motor 2 U phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 2 V Phase Duty | Motor 2 V phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 2 W Phase Duty | Motor 2 W phase duty | Min.: 0.00% Max.: 100.00% | - | - |
| Motor 1 Terminal Volt (U) | Motor 1 terminal voltage (U phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 1 Terminal Volt (V) | Motor 1 terminal voltage (V phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 1 Terminal Volt (W) | Motor 1 terminal voltage (W phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Volt (U) | Motor 2 terminal voltage (U phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Volt (V) | Motor 2 terminal voltage (V phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 2 Terminal Volt (W) | Motor 2 terminal voltage (W phase) | Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 35 V range | Power switch on (READY) and steering wheel being turned |
| Motor 1 PIG Power Supply | Power supply voltage to active motor 1 | Min.: 0.0000 V Max.: 20.1531 V | 9 to 16 V | Power switch on (READY) and steering wheel being turned |
| Motor 2 PIG Power Supply | Power supply voltage to active motor 2 | Min.: 0.0000 V Max.: 20.1531 V | 9 to 16 V | Power switch on (READY) and steering wheel being turned |
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Power Steering System DTC No. Detection Item DTC Detection Condition Warning Indicate Return-to-normal Condition Note Link C1511 Torque Sensor1 Tor
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK STEERING EFFORT (TORQUE) NOTICE: These service operations may affect the SRS airbags. Be sure to read the precautionary notices concerning the SRS airbag syste
SEE MORE:
Lost Communication between Drive Motor "A" and HV ECU Circuit Intermittent (P31241F,P312487)
DESCRIPTION The motor generator control ECU, which is built into the inverter with converter assembly, controls the motor (MG2) based on commands from the hybrid vehicle control ECU. The motor generator control ECU (MG ECU) monitors communication data and detects malfunctions. DTC No. Detection
Adjustment
ADJUSTMENT PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT (a) Remove the front door scuff plate LH. Click here (b) Remove the cowl side trim board LH. Click here (c) Remove the No. 1 instrument panel under cover sub-assembly. Click here (d) Remove the accelerator pedal pad. Click here (e
