Lexus ES: Differential Case
Lexus ES (XZ10) Service Manual / Drivetrain / Ua80e (automatic Transmission / Transaxle) / Differential Case
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE) *2 FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE) *3 FRONT DIFFERENTIAL
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE) (a) Using SST, remove the front differential case rear tapered roller bearing (outer race) from the aut
Inspection
INSPECTION PROCEDURE 1. INSPECT DIFFERENTIAL CASE ASSEMBLY (a) Using SST, rotate the front differential side gear as shown in the illustration. SST: 09528-52010 09528-05030 Standard: The front dif
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL BATTERY COOLING BLOWER BRACKET (a) Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (b) Engage the clamp. 2. INSTALL BATTERY COOLING BLOWER ASSEMBLY (a) Install the battery
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear shock absorber assembly removal/installation are shown below. Necessary Procedures After Parts Rem
© 2016-2026 Copyright www.lexguide.net
