Lexus ES: Diagnostic Trouble Code Chart
Lexus ES (XZ10) Service Manual / Vehicle Exterior / Sliding Roof / Convertible / Panoramic Moon Roof System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Panoramic Moon Roof System| DTC No. | Detection Item | Link |
|---|---|---|
| B2341 | Sensor (Motor) Failure | |
| B2342 | Switch Failure | |
| B2343 | Position Initialization Incomplete | |
| B2344 | Position Failure | |
| B2345 | Motor Control Relay Stuck ON | |
| B2346 | Lost Communication with Front Shade Module | |
| B2347 | Sensor (Motor) Failure (Fr Shade) | |
| B2348 | Position Initialization Incomplete (Fr Shade) | |
| B2349 | Position Failure (Fr Shade) | |
| B234A | Motor Control Relay Stuck ON (Fr Shade) | |
.gif)
READ NEXT:
Sensor (Motor) Failure (B2341,B2344)
DESCRIPTION When the sliding roof ECU (sliding roof drive gear assembly) detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored. When the sliding roof ECU (sliding
Switch Failure (B2342)
DESCRIPTION This DTC is stored when the sliding roof ECU (sliding roof drive gear assembly) detects that the panoramic moon roof switch (map light sub-assembly) is stuck for 30 seconds or more. DTC
Position Initialization Incomplete (B2343)
DESCRIPTION This DTC is stored when the sliding roof ECU (sliding roof drive gear assembly) has not been initialized. DTC No. Detection Item DTC Detection Condition Trouble Area B2343 P
SEE MORE:
DCM Data Signal Circuit between Navigation ECU and DCM
DESCRIPTION This circuit is used to send and receive signals between the DCM (Telematics Transceiver), radio receiver assembly and navigation ECU. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - DCM (TELEMATICS TRANSCEIVER)) (a) Disconnect the G128 DCM (T
Multi-axis Acceleration Sensor Module "A" Supply Voltage Circuit Voltage Out of Range (C14D71C)
DESCRIPTION The airbag ECU assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. This DTC is stored when the skid control ECU (brake actuator assembly) receives a sensor supply voltage malfunction signal from the yaw rate and acceleration sensor (airbag ECU asse
© 2016-2026 Copyright www.lexguide.net
