Lexus ES: Diagnostic Trouble Code Chart
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Road Sign Assist System (for Hv Model) / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Road Sign Assist System| DTC No. | Detection Item | Link |
|---|---|---|
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | |
| U012987 | Lost Communication with Brake System Control Module Missing Message | |
| U014087 | Lost Communication with Body Control Module Missing Message | |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY (ROAD SI
Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012987,U014087,U015587,U029387)
DESCRIPTION When a malfunction is detected between various ECUs and sensors, these DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area U012587 Lost Communicatio
SEE MORE:
Brake Switch "A" Circuit Short to Ground (P057111)
DESCRIPTION The skid control ECU (brake actuator assembly) receives stop light switch assembly signals and uses them to determine whether or not the brakes are applied. When the brake pedal is depressed and no signal is received from the stop light switch assembly, this DTC is output. DTC No. D
Input / Output Signal Circuit
DESCRIPTION The stereo component equalizer assembly uses this circuit to send and receive signals to and from the stereo component amplifier assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT EQUALIZER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY) (a) Dis
© 2016-2026 Copyright www.lexguide.net
