Lexus ES manuals

Lexus ES: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012987,U014087,U015587,U029387)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Road Sign Assist System (for Hv Model) / Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012987,U014087,U015587,U029387)

DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U012587

Lost Communication with Multi-axis Acceleration Sensor Module Missing Message

While the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the yaw rate sensor (airbag ECU assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

CAN communication system

U012987

Lost Communication with Brake System Control Module Missing Message

2 seconds or more after the power switch is turned on (IG), while the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the skid control ECU (brake booster with master cylinder assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

CAN communication system

U014087

Lost Communication with Body Control Module Missing Message

2 seconds or more after the power switch is turned on (IG), while the road sign assist system is on, a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more.

CAN communication system

U015587

Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message

2 seconds or more after the power switch is turned on (IG), while the road sign assist system is on, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more.

CAN communication system

U029387

Lost Communication with Hybrid Powertrain Control Module Missing Message

2 seconds or more after the power switch is turned on (IG), while the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 5 seconds or more.

CAN communication system

PROCEDURE

1.

CHECK FOR DTCs

(a) Clear the DTCs.

Body Electrical > Road Sign Assist > Clear DTCs

(b) Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Body Electrical > Road Sign Assist > Trouble Codes

Result

Proceed to

DTC U012587, U012987, U014087, U015587 and U029387 are not output

A

DTC U012587, U012987, U014087, U015587 or U029387 is output

B

A

USE SIMULATION METHOD TO CHECK

B

GO TO CAN COMMUNICATION SYSTEM

READ NEXT:

 Hybrid / Battery Control

 Accelerator Pedal Sensor

 Components

COMPONENTS ILLUSTRATION *1 ACCELERATOR PEDAL ASSEMBLY *2 ACCELERATOR PEDAL PAD *3 ACCELERATOR PEDAL SENSOR ASSEMBLY *4 NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Tighte

SEE MORE:

 FR Speed Sensor Wrong Installation (X0452)

DESCRIPTION Code Tester Display Measurement Item Trouble Area X0452 FR Speed Sensor Wrong Installation History of front speed sensor RH being installed incorrectly Front Speed Sensor RH PROCEDURE 1. CHECK FOR DTCs (HEALTH CHECK) (a) Perform the Health Check using the T

 BSM Buzzer Sound Request Signal Malfunction (C2A5C)

DESCRIPTION This DTC is stored when the rear television camera assembly receives an invalid communication signal from the blind spot monitor sensor RH. DTC No. Detection Item DTC Detection Condition Trouble Area C2A5C BSM Buzzer Sound Request Signal Malfunction An invalid communicat

© 2016-2024 Copyright www.lexguide.net