Lexus ES: Control Module Internal Temperature Sensor "A" Circuit Circuit Voltage Out of Range (C10001C,...,C1A961C)
DESCRIPTION
When an internal malfunction is detected in the forward recognition camera, these DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C10001C | Control Module Internal Temperature Sensor "A" Circuit Circuit Voltage Out of Range | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C10051C | Control Module Internal Temperature Sensor "B" Circuit Circuit Voltage Out of Range | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C100A62 | Control Module Internal Temperature Sensor A/B Correlation Signal Compare Failure | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A9346 | Main Microcomputer in Front Recognition Camera Calibration/Parameter Memory Failure | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A9445 | Image Processing Microcomputer in Front Recognition Camera Program Memory Failure | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A9447 | Image Processing Microcomputer in Front Recognition Camera Watchdog/Safety MCU Failure | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A9487 | Image Processing Microcomputer to Main Microcomputer in Front Recognition Camera Missing Message | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A9500 | Image Processing Module Malfunction in Front Recognition Camera | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
| C1A961C | Power Supply Circuit in Front Recognition Camera Circuit Voltage Out of Range | A forward recognition camera internal malfunction is detected. | Forward recognition camera |
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
.gif)
Sequential Recognition: Click here
PROCEDURE
| 1. | CHECK FOR DTCs |
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs(b) Turn the power switch off.
(c) Turn the power switch on (IG) and wait 80 seconds or more.
(d) Check for DTCs.
Chassis > Front Recognition Camera > Trouble Codes| Result | Proceed to |
|---|---|
| DTC C10001C, C10051C, C100A62, C1A9346, C1A9445, C1A9447, C1A9487, C1A9500 and C1A961C are not output | A |
| DTC C10001C, C10051C, C100A62, C1A9346, C1A9445, C1A9447, C1A9487, C1A9500 or C1A961C is output | B |
| A | .gif) | USE SIMULATION METHOD TO CHECK |
|
.gif)
| 2. | REPLACE FORWARD RECOGNITION CAMERA |
(a) Replace the forward recognition camera.
Click here
(b) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
| NEXT | | END |
READ NEXT:
Steering Vibrator System Missing Message (C1A7587)
DESCRIPTION The forward recognition camera communicates with the steering vibration ECU via LIN communication. If a communication error between the forward recognition camera and steering vibration EC
Front Recognition Camera Optical Axis Misalignment Malfunction (C1AA800)
DESCRIPTION The forward recognition camera monitors its optical axis status. If it determines that the optical axis alignment has become misaligned, it will store DTC C1AA800. DTC No. Detection I
Front Recognition Camera Heater Malfunction (C1AAE00)
DESCRIPTION The forward recognition camera controls the flow of current to the forward recognition with heater hood sub-assembly. If the forward recognition camera detects a malfunction in the forward
SEE MORE:
Disposal
DISPOSAL PROCEDURE 1. DISPOSE OF LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY (a) Secure the luggage compartment door support assembly horizontally in a vise with the piston rod pulled out. (b) Wearing safety glasses, gradually cut a part within the area (a) shown in the illustration usi
Components
COMPONENTS ILLUSTRATION *A for Side *B for Center *1 COWL SIDE TRIM BOARD *2 FRONT DOOR OPENING TRIM COVER *3 FRONT DOOR SCUFF PLATE *4 FRONT NO. 2 SPEAKER ASSEMBLY *5 FRONT NO. 3 SPEAKER ASSEMBLY *6 FRONT PILLAR GARNISH ASSEMBLY *7 NO. 1 INSTRUMENT PANE
