Lexus ES manuals

Lexus ES: Brake System (for Gasoline Model)

Lexus ES (XZ10) Service Manual / Brake / Brake System (other) / Brake System (for Gasoline Model)

READ NEXT:

 Precaution

PRECAUTION NOTICE: This vehicle is equipped with an SRS (Supplemental Restraint System). Failure to carry out service operations in the correct sequence could cause the SRS to unexpectedly deploy d

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of pr

 Brake System (for Hv Model)

SEE MORE:

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN (a) Secure the brake master cylinder sub-assembly in a vise. NOTICE: Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly. (b) Using a 5 mm pin punch and a hammer, tap out the brake master

 System Diagram

SYSTEM DIAGRAM Communication Table Transmitting ECU Receiving ECU Signal Communication Method Certification ECU (smart key ECU assembly) Main body ECU (multiplex network body ECU) Luggage electrical key switch signal CAN Combination meter assembly Main body ECU (multiplex

© 2016-2025 Copyright www.lexguide.net