Lexus ES manuals

Lexus ES: Brake Pedal Stroke Sensor (for Hv Model)

Lexus ES (XZ10) Service Manual / Brake / Brake Control / Dynamic Control Systems / Brake Pedal Stroke Sensor (for Hv Model)

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY - - ILLUSTRATION *1 BRAKE PEDAL STROKE SENSOR ASSEMBLY *2 BRAKE PEDAL SUPPORT ASSEMBLY N*m (kgf

 Installation

INSTALLATION PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT Click here 2. INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY NOTICE: Do not drop the brake pedal stroke sensor assembly. If the brak

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during brake

SEE MORE:

 Inspection

INSPECTION PROCEDURE 1. INSPECT DIRECT FUEL INJECTOR ASSEMBLY NOTICE: This inspection is for checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked. (a) Measure the

 Headlight ECU LH Communication Stop Mode

DESCRIPTION Detection Item Symptom Trouble Area Headlight ECU LH Communication Stop Mode Any of the following conditions are met: Communication stop for "HL AutoLeveling/AFS/AHS" is indicated on the "Communication Bus Check" screen of the Techstream. Click here Communication st

© 2016-2026 Copyright www.lexguide.net