Lexus ES: Back Window Glass
READ NEXT:
Components
COMPONENTS ILLUSTRATION *A w/o Rear Sunshade *B w/ Rear Sunshade *1 CENTER STOP LIGHT SET *2 NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY *3 PACKAGE TRAY TRIM PANEL ASSEMBLY *4
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during back
Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 BACK WINDOW GLASS STOPPER (for 2-piece Type) (a) Install 2 new No. 1 back window glass stoppers to the vehicle body as shown in the illustration. HINT: Only
SEE MORE:
Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT OIL PUMP ASSEMBLY (a) Install the oil pump drive shaft sub-assembly to the front oil pump assembly. NOTICE:
To avoid damaging the bush of the front oil pump assembly, install the oil pump drive shaft sub-assembly perpendicularly relative to the front oil
Fuel Rail Pressure Sensor (Low) Signal Stuck in Range (P107A2A,P107A64)
DESCRIPTION Refer to DTC P107A11. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P107A2A Fuel Rail Pressure Sensor (Low) Signal Stuck in Range When target low pressure side fuel pressure changes, the change in fuel pressure sensor valu
© 2016-2026 Copyright www.lexguide.net
