Lexus ES: All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter
DESCRIPTION
Wireless Transmitter-linked Function
-
When a key switch is pushed: 1) the door control receiver receives the wireless door lock signal; 2) the door control receiver sends a signal to the main body ECU (multiplex network body ECU) through the certification ECU (smart key ECU assembly); 3) the main body ECU (multiplex network body ECU) sends the operation permission signal to the power window regulator motor assemblies; and 4) the power window regulator motor assemblies are activated.
Key-linked Function
-
When the driver door key cylinder (key linked switch) is turned and held: 1) the door lock motor receives the signal; 2) the main body ECU (multiplex network body ECU) sends the signal to the power window regulator motor assemblies; and 3) the power window regulator motor assemblies are activated.
CAUTION / NOTICE / HINT
PROCEDURE
1. | CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM) |
(a) Check that the wireless door lock / unlock function operates normally.
Click here
(b) Check that the key-linked lock/unlock function operates normally.
Click here
Result | Proceed to |
Wireless door lock/unlock function and key-linked lock/unlock function operate normally | A |
Wireless door lock/unlock function does not operate normally | B |
Key-linked lock/unlock function does not operate normally | C |
B | | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) |
A | | |
2. | CHECK MANUAL UP / DOWN FUNCTION |
(a) Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assemblies can operate all of the power windows.
Click here
OK:
Manual up and down functions are normal.
NG | | GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) |
OK | | |
3. | CHECK REMOTE UP / DOWN FUNCTION |
(a) Check that the remote up and down functions using the multiplex network master switch assembly can operate all of the power windows.
Click here
OK:
Remote up and down functions are normal.
NG | | GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) |
READ NEXT:
DESCRIPTION When the front doors are closed, each power window regulator motor assembly can be operated for approximately 45 seconds after the engine switch is turned from on (IG) to off by receiving
DESCRIPTION If a door glass does not slide smoothly or a power window regulator motor assembly or door window regulator sub-assembly does not operate smoothly, the catch protection function may be tri
DESCRIPTION If a door glass does not slide smoothly or a power window regulator motor assembly or door window regulator sub-assembly does not operate smoothly, the jam protection function may be trigg
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY) (a) Install the fuel vapor containment valve (fuel tank solenoid main valve assembly) to the vehicle body with the 2 nuts. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} (b) Push the fuel tank vent ho
COMPONENTS ILLUSTRATION *1 TIRE PRESSURE WARNING ECU AND RECEIVER - - N*m (kgf*cm, ft.*lbf): Specified torque - -
© 2016-2024 Copyright www.lexguide.net