Lexus ES: 2gr-fks (fuel)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / 2gr-fks (fuel)
- Fuel Filter
- Fuel Injector (for Direct Injection)
- Fuel Injector (for Port Injection)
- Fuel Main Valve
- Fuel Pressure Sensor
- Fuel Pressure Sensor (for High Pressure)
- Fuel Pump
- Fuel Pump (for High Pressure)
- Fuel Pump Ecu
- Fuel Sender Gauge Assembly
- Fuel System
- Fuel Tank
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FUEL SUCTION PLATE SUB-ASSEMBLY *2 NO. 1 FUEL SUCTION SUPPORT *3 FUEL FILTER - -
Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during
SEE MORE:
Vehicle Control History
VEHICLE CONTROL HISTORY CHECK VEHICLE CONTROL HISTORY (HYBRID CONTROL SYSTEM) (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History (RoB). Powertrain > H
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL SUNSHADE TRIM SUB-ASSEMBLY (a) Make sure that the No. 1 sliding roof shoe sub-assembly is positioned as shown in the illustration. HINT: Use the same procedure for the RH side and LH side. *a No. 1 Sliding Roof Shoe Sub-assembly *b Cutout
© 2016-2026 Copyright www.lexguide.net
