Lexus ES: Operation Check
OPERATION CHECK
CHECK FUEL LID OPENER SYSTEM
(a) Push the trunk and fuel switch assembly (fuel lid opener switch) and check that the fuel lid opens.
READ NEXT:
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following s
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL REAR ENGINE MOUNTING INSULATOR (a) Engage the clamp and install the vacuum hose to the rear engine mounting insulator. (b) Install the wire harness clamp bracket to the rear engine mounting insulator with the bolt. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (c) Al
COMPONENTS ILLUSTRATION *A for Type A - - *1 FUEL SENDER GAUGE ASSEMBLY *2 FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY ILLUSTRATION *A for Type B - - *1 FUEL SENDER GAUGE ASSEMBLY *2 FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY *3 FUEL GAUGE BRAC
© 2016-2026 Copyright www.lexguide.net
