Lexus ES manuals

Lexus ES: Luggage Compartment Door Opener Main Switch

Lexus ES (XZ10) Service Manual / Vehicle Interior / Door / Hatch / Luggage Compartment Door Opener Main Switch

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 GLOVE COMPARTMENT DOOR ASSEMBLY *2 LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during lug

 Inspection

INSPECTION PROCEDURE 1. INSPECT LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:

SEE MORE:

 Steering Angle Sensor Internal Circuit (C1433)

DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor. DTC No. Detection Item INF Code DTC Detection Condition Trouble Area MIL Note C1433 Steering Angle Sens

 Power Mirror Surface Position is not Memorized

DESCRIPTION If any of the M1, M2 or M3 seat memory switch is pressed, the outer mirror control ECU assembly (driver door) detects the switch operation and sends the seat memory switch signal to the main body ECU (multiplex network body ECU) via CAN communication. On receiving the seat memory switch

© 2016-2026 Copyright www.lexguide.net