Lexus ES manuals

Lexus ES: Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

Wiper and Washer System

DTC No.

Detection Item

DTC Output from

Link

B1245

Lost Communication with Wiper ECU LIN

Main Body

B1279

Lost Communication with Humidity/Rain Sensor LIN

Main Body

B1370

ECU Malfunction

Windshield wiper motor assembly

B1372

Wiper Switch Signal Mismatch between LIN and Line

Wiper

B1373

Lost Communication with Wiper System LIN BUS

Main Body

B1400

Rain Sensor Malfunction

Rain sensor

READ NEXT:

 Lost Communication with Wiper ECU LIN (B1245)

DESCRIPTION The main body ECU (multiplex network body ECU) and windshield wiper motor assembly communicate via LIN communication. The main body ECU (multiplex network body ECU) stores this DTC if comm

 Lost Communication with Humidity/Rain Sensor LIN (B1279)

DESCRIPTION The main body ECU (multiplex network body ECU) and rain sensor communicate via LIN communication. The main body ECU (multiplex network body ECU) stores this DTC if communication becomes ab

 ECU Malfunction (B1370)

DESCRIPTION This DTC is stored when the windshield wiper motor assembly detects an internal malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area Memory DTC Output from

SEE MORE:

 System Description

SYSTEM DESCRIPTION FUNCTION OF COMPONENTS (a) The parking support brake system consists of the following components: Component Function Clearance Warning ECU Assembly Sends the drive force request signals and control status signals to the ECM and skid control ECU. Sends the multi-inf

 Installation

INSTALLATION PROCEDURE 1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY (a) Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly. Adhesive: Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent NOTICE: Do not apply adhesive to the oil inlet port of the engine oil

© 2016-2026 Copyright www.lexguide.net