Lexus ES: Diagnostic Trouble Code Chart
Lexus ES (XZ10) Service Manual / Power Source & Network / A25a-fxs (battery / Charging) / Charging System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Charging System| DTC No. | Detection Item | Warning Indicate | Memory | Link |
|---|---|---|---|---|
| P058A01 | Auxiliary Battery Monitor Module Range/Performance | Charge warning is not displayed | DTC stored | |
| P162B87 | Lost Communication with Battery Monitor Module Missing Message | Charge warning is not displayed | DTC stored | |
.gif)
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
Some Data List values may vary significantly if there are slight differences in the environment in which the vehicle is operating when measurements are obt
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
Some Data List values may vary significantly if there are slight differences in the environment in which the vehicle is operating when measurements are obt
Fail-safe Chart
FAIL-SAFE CHART If any of the following DTCs are stored, the hybrid vehicle control ECU enters fail-safe mode to allow the vehicle to be driven temporarily. Charging System DTC No. Fail-safe Oper
SEE MORE:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
If CAN communication system and lane control system DTCs are not output and any of the following problem symptoms exist, perform troubleshooting by checking the appropriate suspected areas in the order they are listed.
Use the table below to help determine the cause
Active Noise Control ECU Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Active Noise Control ECU Communication Stop Mode Any of the following conditions are met:
Communication stop for "Active Noise Control" is indicated on the "Communication Bus Check" screen of the Techstream.
Click here
Communicatio
© 2016-2026 Copyright www.lexguide.net
