Lexus ES: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE PARKING SUPPORT ALERT SYSTEM
(a) Customizing with the Techstream
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the parking support alert system on.
(4) Turn the Techstream on.
(5) Enter the following menus: Body Electrical / Advanced Parking Guidance/ICS/Intuitive P/A / Utility / Customize Setting.
(6) Select the setting by referring to the table below.
Warning| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Fr Corner Sensor Onset Range | Sets the detection operation range for the front corner sensors. | Long | 0:Short,1:Long | Clearance warning ECU assembly |
| Rr Corner Sensor Onset Range | Sets the detection operation range for the rear corner sensors. | Long | 0:Short,1:Long | Clearance warning ECU assembly |
| Fr Sensor Onset Range | Sets the detection operation range for the front center sensors. | Wide | 0:Narrow,1:Wide | Clearance warning ECU assembly |
| Rr Sensor Onset Range | Sets the detection operation range for the rear center sensors. | Wide | 0:Narrow,1:Wide | Clearance warning ECU assembly |
| Keep Sense Buzzer | Sets whether the buzzer stops sounding when the distance between the vehicle and a detected object does not change for 3 seconds. | Avail | 0:Not Avail,1:Avail | Clearance warning ECU assembly |
| Fr & Rr Buzzer Volume | Changes the buzzer volume setting. | M | 01:L,10:M,11:H | Clearance warning ECU assembly |
| Object Not Moving 3s Buzz Vol | Sets the volume at which the buzzer sounds when the distance between the vehicle and a detected object does not change for 3 seconds. | Keep | 00:Keep Vol,01:L,10:M1,11:M2 | Clearance warning ECU assembly |
| Leave Buzzer Volume | Sets the volume of the buzzer with respect to the distance between the vehicle and a detected object. | L | 00:Keep Vol,01:L,10:M1,11:M2 | Clearance warning ECU assembly |
| Temporary Mute Reset Speed Adjust | Sets the vehicle speed at which the temporary mute function resets. | 20 km/h | 00:System Link,01:15km/h,10:20km/h,11:30km/h | Clearance warning ECU assembly |
| Temporary Mute Function | Sets the availability of the temporary mute function. | ON | 0:OFF,1:ON | Clearance warning ECU assembly |
| Intuitive P/A Auto Mute Function | Sets the availability of the auto mute function. | ON | 0:ON,1:OFF | Clearance warning ECU assembly |
| Intuitive P/A Judgement of Obstacle on Course | Sets the availability of judgement of obstacle on course. | Valid | 0:Valid,1:Invalid | Clearance warning ECU assembly |
| BSM Buzzer Volume Adjust | Sets the volume of the RCTA buzzer (blind spot monitor buzzer). | Medium | 001:Low,011:Medium,101:High | Clearance warning ECU assembly |
| RCTA Function | Switches the RCTA function on and off. | ON | 0:ON,1:OFF | Clearance warning ECU assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Sensor Condition N | Makes the front sensors available when the shift lever is in N. | Avail | 0:Not Avail,1:Avail | Clearance warning ECU assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Approach Display OFF | Sets whether the display turns off after an obstacle is no longer detected. | Avail | 0:Not Avail,1:Avail | Clearance warning ECU assembly |
| Display Mode | The display mode setting (when the parking support alert system is normal) | All | 01:All,11:Undisp | Clearance warning ECU assembly |
(b) Customizing with combination meter assembly
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(1) Turn the power switch on (IG).
(2) Turn the parking support alert system on.
(3) Enter the following menus: PKSA
(4) Select the setting by referring to the table below.
Parking Support Alert System| Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Alert Volume | Sets the buzzer alert volume. | 2 | 1, 2, or 3 | Clearance warning ECU assembly |
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a pa
Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION (a) When troubleshooting a vehicle with a diagnosis system, the only difference from the usual troubleshooting procedure is connecting the Techstream to the vehicle and re
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Parking Support Alert System DTC No. Detection Item Link C1611 ECU Malfunction C168D Vehicle Information Unmatched C1AE1 Front Left Sen
SEE MORE:
Purge Valve
ComponentsCOMPONENTS ILLUSTRATION *1 PURGE VALVE (PURGE VSV) *2 NO. 1 FUEL VAPOR FEED HOSE *3 NO. 2 FUEL VAPOR FEED HOSE - - N*m (kgf*cm, ft.*lbf): Specified torque - - RemovalREMOVAL PROCEDURE 1. REMOVE PURGE VALVE (PURGE VSV) (a) Disconnect the purge valve (p
Removal
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after parts are removed and installed, or replaced during
front brake flexible hose removal/installation are shown below.
Necessary Procedures After Parts
