Lexus ES: Adjusting the steering wheel and
mirrors
READ NEXT:
Adjustment procedure
Manual adjustment type
1. Hold the steering wheel and pull
the lever down.
2. Adjust to the ideal position by moving
the steering wheel horizontally
and vertically.
Aft
The rear view mirror's position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
The height of the rear view mirror can
be adjusted to
The rear view mirror's position can
be adjusted to enable sufficient
confirmation of the rear view.
WARNING
■Important points while driving
Observe the following precautions while
driving.
SEE MORE:
PARTS LOCATION ILLUSTRATION *1 ACCELERATOR PEDAL SENSOR ASSEMBLY *2 COMBINATION METER ASSEMBLY *3 AIR CONDITIONING AMPLIFIER ASSEMBLY *4 SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) *5 NO. 3 RELAY BLOCK - IGCT RELAY *6 SHIFT POSITION INDICATOR *7 DRIVE
REASSEMBLY PROCEDURE 1. INSTALL FRONT DRIVE SHAFT BEARING (for RH Side) (a) Using SST, a steel plate and a press, install a new front drive shaft bearing. SST: 09527-10011 NOTICE: The bearing should be completely installed. *a Steel Plate (b) Using a snap ring expander,
© 2016-2026 Copyright www.lexguide.net
