Lexus ES manuals

Lexus ES: System Description

SYSTEM DESCRIPTION

SLIDING ROOF SYSTEM DESCRIPTION

(a) The sliding roof system controls the sliding roof operation using the sliding roof ECU (sliding roof drive gear sub-assembly). Operating the sliding roof switch (map light sub-assembly) results in electrical power being transmitted to the sliding roof ECU (sliding roof drive gear sub-assembly).

FUNCTION OF MAIN COMPONENT

The sliding roof system consists of the following components:

Component

Outline

Sliding roof ECU (Sliding roof drive gear sub-assembly)

Controls the rotational direction of the motor, which tilts or slides the sliding roof.

Sliding roof switch (Map light sub-assembly)

Outputs operation signals to the sliding roof ECU (sliding roof drive gear sub-assembly).

SYSTEM FUNCTION

The sliding roof system has the following functions:

Function

Outline

Manual slide open and close function

This function causes the sliding roof to open (or close) when the OPEN switch (or CLOSE switch) is pressed for a maximum of 0.3 seconds. The sliding roof stops as soon as the switch is released.

Auto slide open and close function

This function causes the sliding roof to reach the comfort stop position or fully open (or fully close) when the OPEN switch (or CLOSE switch) is pressed for a minimum of 0.3 seconds.

Manual tilt up and down function

This function causes the sliding roof to tilt up (or tilt down) when the UP switch (or DOWN switch) is pressed for a maximum of 0.3 seconds. The sliding roof stops as soon as switch is released.

Auto tilt up and down function

This function causes the sliding roof to fully tilt up (or tilt down) when the UP switch (or DOWN switch) is pressed for a minimum of 0.3 seconds.

Jam protection function

The jam protection function automatically stops the sliding roof and moves it open halfway (or fully tilt up) if foreign matter gets jammed in the sliding roof during close or tilt down operation.

Key-off operation function

The key-off operation function makes it possible to operate the sliding roof for approximately 45 seconds after the engine switch is turned from on (IG) to off, if both the driver door and front passenger door are not opened.

Key-linked function*

  • When the electrical key transmitter sub-assembly is not in the vehicle, the driver door is unlocked, and the driver door key cylinder is turned and held in the unlock position for 2.5 seconds or more, the sliding roof ECU (sliding roof drive gear sub-assembly) activates the sliding roof motor to open the sliding roof while the key cylinder is turned.
  • When the electrical key transmitter sub-assembly is not in the vehicle, the driver door is locked, and the driver door key cylinder is turned and held in the lock position for 2.5 seconds or more, the sliding roof ECU (sliding roof drive gear sub-assembly) activates the sliding roof motor to close the sliding roof while the key cylinder is turned.

HINT:

This function is linked with the power window key-linked function.

Wireless transmitter-linked function*

When the main body ECU (multiplex network body ECU) receives an unlock signal from the electrical key transmitter sub-assembly continuously for longer than 4 seconds, the sliding roof ECU (sliding roof drive gear sub-assembly) activates the sliding roof motor to open the sliding roof while the switch of the electrical key transmitter sub-assembly is being pressed.

HINT:

This function is linked with the power window wireless transmitter-linked function.

Sliding roof open warning function

When the engine switch is turned from on (IG) to off and the driver door is opened with the sliding roof open, the buzzer in the combination meter assembly sounds once and a warning message is displayed on the multi-information display.

  • *: This function is set through the customize setting, as it is off by default.

READ NEXT:

 How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the sliding roof system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT

 Operation Check

OPERATION CHECK CHECK AUTO OPERATION FUNCTION NOTICE: Make sure that initialization has been completed before performing this inspection. Click here The sliding roof auto operation can be custo

 Customize Parameters

CUSTOMIZE PARAMETERS CUSTOMIZE SLIDING ROOF SYSTEM HINT: The following items can be customized. NOTICE: When the customer requests a change in a function, first make sure that the function can be c

SEE MORE:

 Throttle Actuator "A" Control Motor Circuit Current Below Threshold (P210018,P210019)

DESCRIPTION The throttle actuator is operated by the ECM and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position sensor, which is mounted on the throttle body with motor assembly. The throttle position sensor provides feedback

 Purge Valve

ComponentsCOMPONENTS ILLUSTRATION *1 PURGE VALVE (PURGE VSV) *2 NO. 1 FUEL VAPOR FEED HOSE *3 NO. 2 FUEL VAPOR FEED HOSE - - N*m (kgf*cm, ft.*lbf): Specified torque - - RemovalREMOVAL PROCEDURE 1. REMOVE PURGE VALVE (PURGE VSV) (a) Disconnect the purge valve (p

© 2016-2024 Copyright www.lexguide.net