Lexus ES: ANC ECU EEPROM Data Memory Failure (B1AA044)

Lexus ES (XZ10) Service Manual / Audio & Visual & Telematics / Audio / Video / Active Noise Control System (for Gasoline Model) / ANC ECU EEPROM Data Memory Failure (B1AA044)

DESCRIPTION

This DTC is stored when a malfunction occurs in the stereo component equalizer assembly.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B1AA044	ANC ECU EEPROM Data Memory Failure	Stereo component equalizer assembly malfunction	Stereo component equalizer assembly

PROCEDURE

CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Active Noise Control > Clear DTCs

2.	CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Active Noise Control > Trouble Codes

OK:

No DTCs are output.

USE SIMULATION METHOD TO CHECK

REPLACE STEREO COMPONENT EQUALIZER ASSEMBLY

SEE MORE:

Check Bus 3 Line for Short to GND

DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 6 (CA3H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 21 (CA3L) of the central gateway ECU (network gateway ECU) and termina

Reassembly

REASSEMBLY PROCEDURE 1. INSTALL SUNSHADE TRIM SUB-ASSEMBLY (a) Make sure that the No. 1 sliding roof shoe sub-assembly is positioned as shown in the illustration. HINT: Use the same procedure for the RH side and LH side. *a No. 1 Sliding Roof Shoe Sub-assembly *b Cutout

Lexus ES: ANC ECU EEPROM Data Memory Failure (B1AA044)

READ NEXT:

UART Communication Between ANC and Audio Amplifier Missing Message (B1AA187)

Front Left Microphone Circuit Component Internal Failure (B1AA296,B1AA31C)

Front Right Microphone Circuit Component Internal Failure (B1AA696,B1AA71C)

SEE MORE:

Check Bus 3 Line for Short to GND

Reassembly