Lexus ES: Right Front Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12BB12,...,C12C649)
DESCRIPTION
The ABS solenoid relay and solenoid valves are built into the brake actuator assembly.
The front solenoid valve RH controls the brake fluid pressure of the front wheel cylinder RH of the vehicle.
When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the solenoid valves from operating.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C12BB12 | Right Front Wheel ABS Hold Solenoid Control Circuit Short to Battery | A short to +B in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12BB14 | Right Front Wheel ABS Hold Solenoid Control Circuit Short to Ground or Open | An open or short in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12BB1C | Right Front Wheel ABS Hold Solenoid Control Circuit Voltage Out of Range |
| Skid control ECU (brake actuator assembly) |
| C12BB1E | Right Front Wheel ABS Hold Solenoid Control Circuit Resistance Out of Range | An abnormal resistance in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12BB49 | Right Front Wheel ABS Hold Solenoid Control Internal Electronic Failure | An internal malfunction in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12C612 | Right Front Wheel ABS Release Solenoid Control Circuit Short to Battery | A short to +B in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12C614 | Right Front Wheel ABS Release Solenoid Control Circuit Short to Ground or Open | An open or short in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12C61C | Right Front Wheel ABS Release Solenoid Control Circuit Voltage Out of Range |
| Skid control ECU (brake actuator assembly) |
| C12C61E | Right Front Wheel ABS Release Solenoid Control Circuit Resistance Out of Range | An abnormal resistance in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| C12C649 | Right Front Wheel ABS Release Solenoid Control Internal Electronic Failure | An internal malfunction in the solenoid circuit is detected during the self test. | Skid control ECU (brake actuator assembly) |
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | An open in the solenoid circuit is detected during the self test. | ○ | - |
| A short in the solenoid circuit is detected during the self test. | - | ○ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
DTC Detection Conditions: C12BB1C| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | A current leak in the solenoid circuit is detected during the self test. | ○ | - |
| The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time. | - | ○ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
DTC Detection Conditions: C12C614| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | An open in the solenoid circuit is detected during the self test. | ○ | - |
| A short in the solenoid circuit is detected during the self test. | - | ○ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
DTC Detection Conditions: C12C61C| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | A current leak in the solenoid circuit is detected during the self test. | ○ | - |
| The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time. | - | ○ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
CAUTION / NOTICE / HINT
NOTICE:
After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
Click here .gif)
PROCEDURE
| 1. | REPLACE BRAKE ACTUATOR ASSEMBLY |
(a) Replace the skid control ECU (brake actuator assembly).
Click here
| NEXT |  | END |
READ NEXT:
Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12D112,...,C12DC49)
DESCRIPTION The ABS solenoid relay and solenoid valves are built into the brake actuator assembly. The rear solenoid valve LH controls the brake fluid pressure of the rear wheel cylinder LH of the veh
Right Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12E712,...,C12F249)
DESCRIPTION The ABS solenoid relay and solenoid valves are built into the brake actuator assembly. The rear solenoid valve RH controls the brake fluid pressure of the rear wheel cylinder RH of the veh
Brake Pressure Control Solenoid "A" Control Circuit Short to Battery (C13C012,...,C13C049)
DESCRIPTION The ABS solenoid relay and master cylinder cut solenoid valves are built into the brake actuator assembly. Depending on the operating conditions, the master cylinder cut solenoid valves re
SEE MORE:
Power Window Master Switch
ComponentsCOMPONENTS ILLUSTRATION *1 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY *2 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL RemovalREMOVAL PROCEDURE 1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL Click
Fr Sensor Initialization Incomplete (C1AF3)
DESCRIPTION When it is judged that the front sensors have not been initialized, the clearance warning ECU assembly stores DTC C1AF3. DTC No. Detection Item DTC Detection Condition Trouble Area C1AF3 Fr Sensor Initialization Incomplete Front sensor not initialized
Initialize fro
