Lexus ES manuals

Lexus ES: Motor Electronics Coolant Temperature Sensor Circuit Short to Ground (P0A0011,P0A0015)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Motor Generator Control System (for Lithium-ion Battery) / Motor Electronics Coolant Temperature Sensor Circuit Short to Ground (P0A0011,P0A0015)

DESCRIPTION

Refer to the description for DTC P0A001C.

Click here

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Warning Indicate

P0A0011

Motor Electronics Coolant Temperature Sensor Circuit Short to Ground

Short to ground detected in HV coolant temperature sensor circuit

(1 trip detection logic)

Inverter with converter assembly

Comes on

Master Warning Light:

Comes on

P0A0015

Motor Electronics Coolant Temperature Sensor Circuit Short to Battery or Open

Open or short to +B detected in HV coolant temperature sensor circuit

(1 trip detection logic)

Inverter with converter assembly

Comes on

Master Warning Light:

Comes on

Related Data List

DTC No.

Data List

P0A0011

Inverter Coolant Temperature

P0A0015

MONITOR DESCRIPTION

If the motor generator control ECU detects a malfunction in the HV coolant temperature sensor it will illuminate the MIL and store a DTC.

MONITOR STRATEGY

Related DTCs

P0A02 (INF P0A0011): Motor Electronics Coolant Temperature Sensor Range check (Low voltage)

P0A03 (INF P0A0015): Motor Electronics Coolant Temperature Sensor Range check (High voltage)

Required sensors/components

HV coolant temperature sensor

Frequency of operation

Continuous

Duration

TMC's intellectual property

MIL operation

Immediately

Sequence of operation

None

TYPICAL ENABLING CONDITIONS

The monitor will run whenever the following DTCs are not stored

TMC's intellectual property

Other conditions belong to TMC's intellectual property

-

TYPICAL MALFUNCTION THRESHOLDS

TMC's intellectual property

-

COMPONENT OPERATING RANGE

Motor generator control ECU

DTC P0A02 (INF P0A0011) is not detected

DTC P0A03 (INF P0A0015) is not detected

CONFIRMATION DRIVING PATTERN

HINT:

  • After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

    Click here

  • When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure.

    Click here

  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off and wait for 2 minutes or more.
  5. Turn the power switch on (IG) and turn the Techstream on.
  6. With power switch on (IG) and wait for 5 seconds or more. [*1]

    HINT:

    [*1]: Normal judgment procedure.

    The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.

  7. Enter the following menus: Powertrain / Motor Generator / Utility / All Readiness.
  8. Check the DTC judgment result.

    HINT:

    • If the judgment result shows NORMAL, the system is normal.
    • If the judgment result shows ABNORMAL, the system has a malfunction.
    • If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.

CAUTION / NOTICE / HINT

HINT:

After the repair, clear the DTCs. If the value of Data List item "Inverter Coolant Temperature" is not abnormal (110°C (230°F) or -40°C (-40°F)) when the power switch is turned on (IG), the condition is judged as normal.

(If DTC P0A0011 is output, 110°C (230°F) will be displayed and if DTC P0A0015 is output, -40°C (-40°F) will be displayed.)

PROCEDURE

1.

REFER TO REPLACE INVERTER WITH CONVERTER ASSEMBLY PARTS

Click here

NEXT

COMPLETED

READ NEXT:

 Motor Electronics Coolant Temperature Sensor Circuit Voltage Out of Range (P0A001C)

DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the temperature sensor value is abnormal. The cause of this malfunction may be one of the following: Area Main Malfunction Description

 DC/DC Converter Status Circuit Short to Battery (P0A0812,P0A0814)

DESCRIPTION The DC/DC converter varies output voltage based on voltage change signals (VLO signal line) received from the motor generator control ECU. If the vehicle is being driven with an inoperativ

 DC/DC Converter Enable Circuit Short to Battery (P0A1112,P0A1114)

DESCRIPTION Refer to the description for DTC P1CCC96. Click here The motor generator control ECU sends a signal to the DC/DC converter to prohibit its control and receives signals indicating a norm

SEE MORE:

 Engine Oil Pressure Control Circuit Open (P06DA13)

DESCRIPTION Refer to DTC P052477. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P06DA13 Engine Oil Pressure Control Circuit Open Open or short in oil pressure control valve assembly circuit (1 trip detection logic). Open or sho

 Speaker Circuit (B1350)

DESCRIPTION The vehicle approaching speaker assembly circuit consists of the vehicle approaching speaker controller and vehicle approaching speaker assembly. This DTC is stored when a malfunction is detected in the vehicle approaching speaker assembly circuit or vehicle approaching speaker controlle

© 2016-2024 Copyright www.lexguide.net